These Bob Smith Accessories are great companions to help use Bob Smith and other amazing products. These caps, tips, and applicators are sold in packs of 2 or 6
Extender Tip- #301 (Pack of 6)
For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
Extra Fine Extender Tip - #302 (Pack of 6)
For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.
Extra Long Extender Tip - #303 (Pack of 6)
For use over the standard #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.
Pocket CA Extender Tip - #304 (Pack of 6)
For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.
PTFE Tubing - #305 (Pack of 2)
Two foot length of tubing can be cut off to any length (usually 2"). With one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA.
Extra CA Top - #312 (Pack of 6)
Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.
Extra CA Over Cap - #313 (Pack of 6)
Replacement colored cap that fits over the #312 top.
CA Applicators - #321, #322 (Pack of 6)
#321 - Regular Tip Non-clog 6" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper
#322 - Fine Tip Non-clog 6" long pipette for the application of thin CAs. Can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.