Skip to product information

WP 60A FWD/REV Brushed ESC Electronic Speed Control

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC. * While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user۪s manual.


Waterproof for all weather operation * LiPo and NiMH compatible Program functions changed with the use of jumper pins Up to an 8T motor limit Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles Crawler running mode Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation


Forward: Yes Reverse: Yes Brake: Yes Time Delay Brake: Yes Continuous Maximum Current: FWD: 60A REV: 30A Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd Input Connector Types: EC3 Output Connector Types: 3.5mm Tamiya style bullet Motor Limit: 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors Momentary Peak Current: FWD: 360A REV: 180A Length: 1.48 in (37.5mm) Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs Height: 0.71 in (18mm) Weight: 1.41 oz (40g) BEC Voltage: 5V PWM Frequency: 1KHz Overload Protection: Yes Full On Resistance: .0008 ohms Wire Gauge: 16AWG Auto Cutoff: Yes