Skip to product information

Power 15 Brushless Outrunner Motor, 950Kv

Sorry, this item is out of stock


What we have here is the Power 15 which is designed to deliver clean and quiet power for 15-size sport and scale airplanes weighing 36 to 56 ounces (1020 to 1590 grams), 3D airplanes weighing 32 to 40 ounces (910 to 1135 grams), or flying models requiring up to 575 watts of power.


Equivalent to a 15-size glow engine for sport and scale airplanes weighing 36œ56 oz (1020œ1590 g) Ideal for 3D airplanes weighing 32œ40 oz (910œ1135 g) Ideal for models requiring up to 575 watts of power High-torque, direct-drive alternative to inrunner brushless motors Includes mount, prop adapters and mounting hardware External rotor design�5mm shaft can easily be reversed for alternative motor installations Slotted 14-pole outrunner design High-quality construction with ball bearings and hardened steel shaft Quiet, lightweight operation

Tech Notes

* Maximum Operating Temperature: 220 degrees Fahrenheit * Adequate cooling is required for all motor operation at maximum current levels. * Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor. * Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the motor since excessive use of burst current may overheat the motor. You will need... 40Aœ45A brushless ESC 8-to 12-cells Ni-MH/Ni-Cd or 3œ4S Li-Po 10x6 to 13x6.5 electric prop


: Type: Brushless outrunner motor Size: 15-size Bearings or Bushings: One 5 x 14 x 5mm Bearing, and One 5 x 11 x 5mm Bearings Wire Gauge: 16 Recommended Prop Range: 10x6œ13x6.5 Voltage: 7.4œ14.4V RPM/Volt (Kv): 950 Resistance (Ri): .03 ohms Idle Current (Io): 2.00A @10V Continuous Current: 34A Maximum Burst Current: 42A (15 sec) Cells: 8œ12 Ni-MH/Ni-Cd or 3-4S Li-Po Speed Control: 40œ45A brushless Weight: 152 g (5.4 oz) Overall Diameter: 35mm (1.40 in) Shaft Diameter: 5mm (.20 in) Overall Length: 50mm (1.90 in)